Model Code: C45S (Combination Transmission PTO Gearbox Drive)
2x4/4x4 Transmission Drive Combined with Auxiliary Power Take Off Outputs. All below mentioned Technical Specifications and Power Transmission Ratings Practiced by our new Model C45S are completely Customizable to higher or lower configurations and are currently formulated to find applications till 180
HP Chassis bearing a maximum pay load of 25 Tons. i.e. TATA/AL/AMW 2518.
2x2/4x4 Transmission Gearbox WITHOUT Auxiliary Power Take Off Outputs Also Available On Demand.
INPUT : Our GearBox Input coupling (with universal joint) is to be installed to the main engine gearbox through a balanced propeller shaft to transfer the main drive into our gearbox.
Output A : Front Output : Just below the Input Coupling is the Front Axle Output to drive the Front Differential.
Output B : Rear Output : Below In-Line with the Front Output, the Rear Output
coupling is placed on the REAR side of the gearbox to drive the Rear Differential.
Output Auxiliary Power Take Off Drive: In-Line (horizontal) with the Input coupling towards the right side (As gearbox is viewed from the front side), 2 nos. PTO Outputs with hollow shafts are provided on the front and rear of the gearbox to give auxiliary PTO drives to 2 nos. directly mounted (on our gearbox) hydraulic pumps. Extruding output shafts on each side can also be provided for fitment of universal coupling joints, chain sprocket or Belt and Pulley arrangements.
Precision Engineering for Industrial Demands
This gearbox features a forged and precision-machined steel construction, maximizing durability and strength. Its involute gear tooth profile and high-grade epoxy coating makes it suitable for harsh industrial conditions. The IP55 protection grade ensures strong resistance against dust and water, supporting consistent operation in challenging environments.
Exceptional Performance & Operation
Delivering a remarkable output torque of 8700 Nm and 98% efficiency, the VAS-COMB-C45S-MSA-4BORE gearbox supports continuous operation with minimal noise (<75 dB) and maintenance. Its grease lubrication, single speed mechanism, and bidirectional functionality provide reliable and flexible power transmission for a wide range of heavy-duty applications.
FAQ's of VAS-COMB-C45S-MSA-4BORE-8700NM-R1.0P1.5-B55 60-SINGLE SPEED:
Q: How is the VAS-COMB-C45S-MSA-4BORE-8700NM-R1.0P1.5-B55 60-SINGLE SPEED installed?
A: This model is designed for foot-mounted installation, allowing secure placement on a stable surface in your facility. Proper alignment and secure mounting bolts are essential to ensure optimal performance and safety.
Q: What type of maintenance does the gearbox require during operation?
A: The gearbox is grease lubricated, minimizing the need for frequent servicing. Routine inspections for lubrication levels, noise, and temperature are recommended to prolong its operational life and maintain high efficiency.
Q: When should the gearbox be used in industrial applications?
A: This gearbox is ideal for situations requiring high output torque at low speeds, such as conveyor systems, heavy lifting mechanisms, and other industrial machinery operating at 60 rpm output with 55 kW power requirements.
Q: Where can this gearbox be utilized?
A: It is engineered for heavy-duty industrial environments, suitable for factories, material handling installations, and processing plants across various sectors demanding reliable, continuous operation in ambient conditions from -10C to +60C.
Q: What is the process involved in manufacturing this gearbox?
A: The gearbox is constructed from forged steel that undergoes precision machining to create the involute gear tooth profile, ensuring robust performance, tight tolerances, and extended service life.
Q: How does the product's design benefit industrial operations?
A: With its high efficiency (98%), robust forged steel build, IP55 protection, and low noise level, the gearbox reduces energy loss, withstands harsh conditions, and delivers continuous, reliable performance with minimal downtime.
Gear Ratio 1:1.50 (Other Ratios Available on Demand)
Max. Torque Transfer on Both Front & Rear Outputs: 981 Nm (100.1 Kg-m) Max Power on Both Outputs @ 1500 rpm: 180 HP
Input And Front & Rear Axles (Combined) -
Input/Output Gear Ratio 1:1.00 (Single Speed, Dual Speed available on Demand) Helical Grinded Gear Train ensures safe transmission of power to both axles upto 180 HP. Front and Rear Outputs have DOUBLE BEARING housings to withstand radial and axial vibrations and loads of both the propeller shafts.
Factory:
VAS Engineering Products Pvt Ltd
D-38, Sector-59,
Noida , Uttar Pradesh , India 201301
